|
BCast offers blend tanks / processors in a range of sizes from 300 to 2,600 gallons.
 
Click on either
picture to view it
as a larger picture
Standard Sizes:
| Gallons/Liters | Inside Dia. | Outside Dia. | Straight Side | Overall Height | Legs |
|---|
| 300/1,200 | 3'11" | 4'4" | 3'11" | 7'6" | 3 |
| 400/1,500 | 4'2" | 4'6" | 4' | 6'9" | 3 |
| 500/2,000 | 4'9" | 5'1" | 4' | 7'7" | 3 |
| 600/3,000 | 5'3" | 5'7" | 5' | 8'6" | 3 |
| 1,300/5,000 | 6'3" | 6'7" | 5'10" | 11'2" | 4 |
| 2,600/10,000 | 7'7" | 7'10" | 7'10" | 11'2" | 4 |
Custom sizes and configurations are also available.
Standard Features:
- Interior Construction: 304 Stainless Steel, with #4 finish
- Exterior Construction: 304 Stainless Steel, with #2B finish
- Insulation: Polyurethane, min 2" thick
- Vertical Agitation: Bottom sweep, bottom and side sweep, side and bottom scrape, or turbine (mix-type) - 3 Phase, 230/460 Volt drive, Horsepower amd rpm sized to application
- Manway: Top entering, hinged
- Inlet/Outlet Ports: Sanitary Clamp Connections
- Tank Bottom: Conical with 15 degree slope and center outlet, or 3/4"/ft. Sloped to a full drain side outlet
- Tank Top: Inverted cone with 15 degree slope
- Clean In Place: CIP Device
- Heat Transfer Surface: Side and bottom stainless steel dimple plate rated for 14.9 psi
- Legs: Adjustable stainless steel legs
Optional Features:
- Interior Construction: 304 Stainless Steel, with #2B finish, for applications in which a #4 polished finish is not required
- Interior Construction: 316 Stainless Steel, with #4 finish
- Agitation: May be equipeed with drive specified by the customer
- Level Indicating Device: Liquid level indicating pressure device with monitor
- Temperature Indicating Well: 1/2" dial type thermometer well
|
